Vehicles with automatic transmission

  • Apply the parking brake firmly.
  • Shift the transmission to position P.

Using the SmartKey

  • Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.

Using KEYLESS-GO The SmartKey can only be removed if the transmission is in position P.

Using KEYLESS-GO

  • Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.

When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".

If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.

by pressing and holding the Start/Stop button for three seconds. In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.

    See also:

    Exterior mirror out of position
    If an exterior mirror has been pushed out of position, proceed as follows: Press the mirror-folding button repeatedly until you hear the mirrors engage in position. The mirror housing is ...

    Activating/deactivating the residual heat function
    It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends o ...

    Setting a speed
    WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road condi ...