Releasing the parking lock manually
In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away.
Do not use any sharp-edged objects to remove the selector lever gaiter from the center console. This could damage the selector lever gaiter.
- Apply the parking brake.
- Pry off selector lever gaiter : with a flat, blunt object, (e.g. a screwdriver wrapped in cloth) from the right-hand edge, pulling it up and out.
- Press release buttons ; down and simultaneously move the selector lever out of position P.
The selector lever can now be moved freely until it is returned to position P.
See also:
Closing the hood
WARNING
When closing the hood, use extreme caution
not to catch hands or fingers. Be careful that
you do not close the hood on anyone.
Make sure the hood is securely engaged
before dr ...
Adjusting the seats electrically
1 Head restraint height
2 Seat cushion angle
3 Seat height
4 Seat fore-and-aft adjustment
5 Backrest angle
Vehicles with memory function:
if PRE-SAFE
® has been triggered, the frontpasse ...
Collision warning
If a vehicle is detected in the monitoring range
of Blind Spot Assist and you switch on the turn
signal, a double warning tone sounds. Red
warning lamp 1 flashes. If the turn signal
remains on, de ...