Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed.
It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.
- Turn the SmartKey to position 0 in the ignition lock or remove it.
- To activate: press the button. The indicator lamp in the button lights up.
- To switch off: press the button. The indicator lamp in the button goes out.
Residual heat is deactivated automatically:
- after about 30 minutes
- when the ignition is switched on
- if the battery voltage drops
- if the coolant temperature is too low
See also:
Low-beam headlamps
To switch on the low-beam
headlamps: turn the SmartKey in the ignition lock to position 2 or
start the engine.
Turn the light switch to
.
The indicator lamp in the
instrument cluster light ...
Number of seats
The specifications shown on the Tire and Loading Information placard in the
illustration are examples. The number of seats is vehicle-specific and can differ
from the details shown. The number ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop but ...