Replacing the rear window wiper blade
Removing the wiper blade
- Remove the SmartKey from the ignition lock.
- Fold wiper arm 1 away from the rear window until it engages.
- Position wiper blade 2 at a right angle to wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
- Remove wiper blade 2.
Installing the wiper blade
- Place new wiper blade 2 onto wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
- Make sure that wiper blade 2 is seated correctly.
- Position wiper blade 2 parallel to wiper arm 1.
- Fold wiper arm 1 back onto the rear window.
See also:
Daytime running lamps
Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.
► Turn the light switch to
.
With the e ...
Checking the battery
Press the or
button. The battery is working
properly if battery check lamp 1 lights up briefly
If battery check lamp 1 does not light up briefly during the test, the battery
is discha ...
Trunk emergency release
You can open the trunk lid from inside the
vehicle with the emergency release button.
Briefly press emergency release
button 1.
The trunk lid unlocks and opens.
The trunk lid can be unlocked ...