Tail lamp

  • Switch off the lights.
  • Open the cargo compartment.
  • Open the side trim panel ().

  • Pull out connector 2.
  • Press retaining lugs 1 simultaneously in the direction of the arrow and pull the bulb holder out.

Bulb holder without LED turn signal lamp

Bulb holder without LED turn signal lamp

  1. Tail lamp/brake lamp
  2. Turn signals
  3. Backup lamp
  4. ear fog lamp/tail lamp
  5. Side marker lamp
  • Lightly press the corresponding bulb into the holder, turn it counter-clockwise and remove it from the bulb holder.
  • Insert the corresponding new bulb into the bulb holder and turn it clockwise.
  • Attach the bulb holder and press firmly. The retaining lugs on the bulb holder engage audibly.
  • Insert the connector.
  • Close the side trim panel ().
    See also:

    Cleaning the seat covers
    Do not use microfiber cloths to clean genuine leather, artificial leather or Alcantara® covers. If used often, these can damage the cover. Observe the following when cleaning: • clean genu ...

    The suspension: a proven design in a new guise
    As on the E-Class, the front suspension takes the form of a 3-link front axle with McPherson struts, which has been especially modified for the new CLS. The key feature of this modified suspension ...

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...