High-beam headlamps (halogen headlamps)

  • Switch off the lights.
  • Open the hood.
  • Remove the headlamp cover ().
  • Left-hand headlamp: detach the washer fluid reservoir ().
  • Turn housing cover 1 counter-clockwise and pull it out.
  • Press the handle of bulb holder 2 in the direction of the arrow until bulb holder 2 is released.
  • Take out the handle with bulb holder 2.
  • Take the bulb out of bulb holder 2.

  • Insert the new bulb into bulb holder 2. Lug 3 of the bulb must be pointing upward.
  • Insert bulb holder 2.
  • Push the handle of bulb holder 2 in the opposite direction from the arrow until holder 2 engages.
  • Align housing cover 1 and turn it clockwise until it engages.
  • Left-hand headlamp: fasten the washer fluid reservoir ().
  • Install the headlamp cover ().
    See also:

    System self-test
    The indicator lamp illuminates when you: turn the SmartKey to position 1 or 2 in the ignition lock on vehicles with KEYLESS-GO, press the Start/Stop button once or twice If an adult occupa ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Comfort tuning
    In Comfort mode, the driving characteristics of your vehicle are more comfortable. Select this mode if you prefer a more comfortable driving style, but also when driving fast on straight roads ...