Low-beam headlamps (halogen headlamps)

  • Switch off the lights.
  • Open the hood.
  • Remove the headlamp cover ().
  • Left-hand headlamp: detach the washer fluid reservoir ().
  • Turn housing cover 1 counter-clockwise and pull it out.
  • Pull connector 2 from bulb 4.
  • Unclip retaining spring 3 and fold it down.
  • Pull out bulb 4.
  • Insert the new bulb.
  • Clip retaining spring 3 back in.
  • Attach connector 2 to bulb 4.
  • Attach housing cover 1 and turn it clockwise until it engages.
  • Left-hand headlamp: fasten the washer fluid reservoir ().
  • Install the headlamp cover ().
    See also:

    Preparing the cargo net
    The cargo net can be used in two different positions (behind the B-pillar or the C-pillar). The brackets behind B-pillar : are required for the cargo compartment enlargement (). The corresp ...

    Traction
    WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characterist ...

    External authorization
    If COMAND does not detect your Bluetooth® device, this may be due to particular security settings on your Bluetooth® device. In this case, you can test if your Bluetooth® device can find COMAN ...