Cornering light function

The cornering light function improves the illumination of the road over a wide

The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on.

Active: if you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel.

Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position.

The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes.

    See also:

    Important notes on the use of KEYLESS-GO
    - The KEYLESS-GO key can be used like a conventional key. - You can combine KEYLESS-GO functions with those of a conventional key, e.g. unlock with KEYLESS-GO and lock with the button. - Alw ...

    Adjusting the head restraints manually
    Adjusting the head restraint height To raise: pull the head restraint up to the desired position. To lower: press release catch 1 in the direction of the arrow and push the head restraint do ...

    Downhill gradients
    On long and steep gradients, you must reduce the load on the brakes by shifting early to a lower gear. This allows you to take advantage of the engine braking effect and helps avoid overheati ...