Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
- To change the setting: press and hold down the and buttons simultaneously for approximately six seconds until the battery check lamp () flashes twice.
If the setting of the locking system is changed within the signal range of the vehicle, pressing the or button locks or unlocks the vehicle.
The SmartKey now functions as follows:
- To unlock the driver's door: press the button once.
- To unlock centrally: press the button twice.
- To lock centrally: press the button.
The KEYLESS-GO function is changed as follows:
- To unlock the driver's door: touch the inner surface of the door handle on the driver's door.
- To unlock centrally: touch the inner surface of the door handle on the frontpassenger door or the rear door.
- To lock centrally: touch the outer sensor surface on one of the door handles.
See also:
Programming the integrated garagedoor opener on the rear-view mirror
Programming
WARNING
Only press the transmitter button on the
integrated garage door opener if there are no
persons or objects present within the sweep
of the garage door. People could ...
Coolant temperature display
WARNING
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated e ...
Useful information
This Operator's Manual describes all models and all standard and optional equipment
of your vehicle available at the time of publication of the Operator's Manual. Country-specific
diffe ...