Checking tire pressure electronically
Make sure that the SmartKey is in position
2 in the ignition lock.
Press the
or
button on the
steering wheel to select the Service
menu.
Press the
or
button to select
Tire Pressure.
Press the
button.
The current tire pressure for each wheel will be displayed in the multifunction display.
If the vehicle has been parked for longer than 20 minutes, the Tire Pressures Displayed After Driving A Few Minutes message appears in the display.
After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.
If a spare wheel/emergency spare wheel
is mounted, the system may continue to
show the tire pressure of the wheel that has
been removed for a few minutes. If this
occurs, note that the value displayed for
the position where the spare tire is
mounted is not the same as the spare
wheel/emergency spare wheel's current
tire pressure.
See also:
Direction of rotation
Tires with a specified direction of rotation
have additional benefits, e.g. if there is a risk
of hydroplaning. You will only gain these
benefits if the correct direction of rotation is
mainta ...
Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels
of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
the v ...
Important information
The cooling with air dehumidification function
is only available when the engine is running.
The air inside the vehicle is cooled and
dehumidified according to the temperature
selected.
WARNIN ...