Fuse box on the right in the direction of travel
Open the hood.
Remove any existing moisture from the
fuse box using a dry cloth.
To open: open clamps 2.
Remove cover 2 upwards.
To close: check whether the rubber seal is
lying correctly in cover 2.
Put cover 2 back in position.
Fold down cover 1 and close clamps 2.
The cover must be seated properly,
otherwise moisture or dirt could impair the
function of the fuses.
Close the hood.
See also:
Engine
Display messages
Possible causes/consequences and Solutions
Check Coolant
Level See Operator's Manual
The coolant level is too low.
Add coolant, observing the war ...
Shift ranges
Introduction
When the automatic transmission is in
position D, it is possible to restrict or
derestrict the shift range.
The shift range selected is shown in the
multifunction display. The aut ...
Switching the automatic locking
feature on/off
You can use this function to activate or
deactivate the automatic central locking
feature. If the automatic locking feature is
activated, your vehicle will lock centrally from
a speed of appro ...