Removing a wheel

Unscrew the uppermost wheel bolt

completely. Unscrew the uppermost wheel bolt completely.

instead of the wheel bolt. Screw alignment bolt 1 into the thread instead of the wheel bolt.

Do not place wheel bolts in sand or on a Unscrew the remaining wheel bolts fully.

dirty surface. The bolt and wheel hub Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in.

Mounting a new wheel Remove the wheel.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...

    Problems with fuel and the fuel tank
    Problem Possible causes/consequences and Solutions Fuel is leaking from the vehicle. Risk of explosion or fireThe fuel line or the fuel tank is defective. Turn the ...

    High-beam spot lamp (vehicles with halogen daytime running lamps)
    Switch off the lights. Open the hood. Turn housing cover 1 counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out. Take the bulb out of bulb holder 2. ...