Checking the oil level using the oil dipstick

On vehicles with a 12-cylinder engine, the oil level can be checked using the on-board computer. On all other models, the dipstick must be used to check the engine oil level.

Example: vehicles with a gasoline engine
Example: vehicles with a gasoline engine

Example: vehicles with 4MATIC
Example: vehicles with 4MATIC

To check the oil level with the engine at Park the vehicle on a level surface.

To check the oil level with the engine at operating temperature, switch the engine off and wait for approximately five minutes.

tube. Pull oil dipstick 1 out of the dipstick guide tube.

Slowly slide oil dipstick 1 into the guide Wipe off oil dipstick 1.

tube to the stop, and take it out again. Slowly slide oil dipstick 1 into the guide tube to the stop, and take it out again.

If the level is between MIN mark 3 and MAX mark 2, the oil level is correct.

below, add 0.55 to 1.1 US qt (0.5 to 1.0 l) If the fuel level has sunk to MIN mark 3 or below, add 0.55 to 1.1 US qt (0.5 to 1.0 l) engine oil.

    See also:

    Incoming call
    Rejecting or accepting a call When there is an incoming call, you see a corresponding window in the display. To reject: select Reject by turning the COMAND controller and press to confir ...

    EBD (electronic brake force distribution)
    Observe the "Important safety notes" section (). EBD monitors and controls the brake pressure on the rear wheels to improve driving stability while braking. WARNING If EBD has m ...

    Voice tags
    Voice tags are entered via the Voice Control System; see the separate operating instructions for the Voice Control System. Adding or changing a voice tag You can add one voice tag per address ...