Switching the daytime running lamps on/off
This function is not available in Canada.
If you have activated the Daytime Running Light function and the light switch is in the or position, the daytime running lamps are switched on automatically when the engine is running.
In the dark, the following also light up:
• the parking lamps
• the tail lamps
• the license plate lamp
• the side marker lamps
position, the corresponding lights are switched on. If you switch off the daytime running lamps at night, make sure that the light switch is set to or .
The factory setting is On.
Press the or button on the steering wheel to select the Settings menu.
Press the or button to select Day Running Lights.
Press the button to confirm.
To activate/deactivate: press again.
See also:
Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and
air bags
WARNING
• Damaged seat belts or seat belts that have
been subjected to stress in an accident
must be replaced. Their anchoring points
must also be checked. Only use seat belts
installed or ...
Brake fluid
WARNING
Over a period of time, the brake fluid absorbs
moisture from the air; this lowers its boiling
point.
If the boiling point of the brake fluid is too low,
vapor pockets may form in t ...
Remote control
Overview
1 To switch the screen on/off
2 To switch the button lighting on/off
3 To select the screen for remote control operation (COMAND, SPLITVIEW, L REAR
and REAR R can be selected)
4 ...