Applying/releasing manually
To apply: press handle 1.
The red (USA only) or (Canada only) indicator lamp in the instrument cluster lights up.
The electric parking brake can also be applied when the SmartKey is removed.
To release: switch on the ignition.
Pull handle 1.
The red (USA only) or (Canada only) indicator lamp in the instrument cluster goes out.
The electric parking brake cannot be released unless the SmartKey is in position 1 in the ignition lock or if the ignition has been switched on using the Start/Stop button.
See also:
Decoupling a trailer
WARNING
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your hand
could become trapped between the bumper and trailer drawbar.
Do not disconnect a trailer with an eng ...
Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
► To indicate briefly: press the
combination
switch briefly to the pressure point in the
direction of a ...
Windshield washer system and headlamp cleaning system
The washer fluid reservoir is used for both the
windshield washer system and the headlamp
cleaning system.
Vehicle components and their
service
products must match. You should,
therefore, ...