Transfer case
This section is only valid for vehicles with 4- wheel drive (4MATIC). Power is always transmitted to both axles.
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
system or transfer case could otherwise be
damaged. Contact a qualified specialist
workshop for a performance test.
Mercedes-Benz recommends that you use
an authorized Mercedes-Benz Center for
this purpose.
To prevent ESP® from intervening, the
ignition must be switched off (SmartKey or
the Start/Stop button in position 0 or 1) if:
• the electric parking brake is being tested
on a brake dynamometer.
• the vehicle is being towed with only one
axle raised (not permitted for vehicles
with 4MATIC).
The brake system could otherwise be damaged.
See also:
Checking the coolant level
Only check the coolant level when the vehicle
is on a level surface and the engine has cooled
down.
– Turn the SmartKey to position
2 (Y page 139) in the ignition lock.
On vehicles with KEYLES ...
Design: Distinctive lines flow as an expression of effortless grace and
status
In 1995 the Mercedes-Benz E-Class was the first Mercedes model to appear with
the highly acclaimed twin-headlamp face - a highly symbolic design feature that
still characterises the identity of th ...
Belt warning for the driver and front passenger
Regardless of whether the driver and front passenger have fastened their seat
belts already, the seat belt warning
lamp lights up for 6 seconds after every engine start. It then goes out if the d ...