Transmission position display
The current transmission position is shown in the multifunction display.
1 Transmission position
The arrows in the transmission position display show how and into which transmission positions you can change using the DIRECT SELECT lever.
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select
transmission position D and drive program
E (drive program C on AMG vehicles) or S.
Do not restrict the shift range.
See also:
Cleaning the plastic trim
WARNING
When cleaning the steering wheel boss and
dashboard, do not use cockpit sprays or
cleaning agents containing solvents. Cleaning
agents containing solvents cause the surface
to become ...
Search & Send
"Search & Send" is a destination entry
service. You can find further information on
"Search & Send" in the separate COMAND
operating instructions. ...
Changing the battery
You require a CR 2025 3 V cell battery.
Take the mechanical key out of
the
SmartKey.
Press mechanical key 2 into the
opening
in the SmartKey in the direction of the arrow until battery t ...