Starting procedure with the SmartKey
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/Stop button out of the ignition lock.
To start a gasoline engine: turn the
SmartKey to position 3 in the ignition lock
and release it as soon as the
engine is running.
To start a diesel engine: turn the
SmartKey to position 2 in the ignition lock.
The 
preglow indicator lamp in the
instrument cluster lights up.
When the preglow indicator lamp
goes out, turn the SmartKey to position 3
and release it as soon as the
engine is running.
You can start the engine without preglow
if the engine is warm.
See also:
Locking and unlocking centrally
The SmartKey centrally locks/unlocks:
• the doors
• the trunk lid
• the fuel filler flap
1 Locks the vehicle
2 Unlocks the trunk lid
3 Unlocks the vehicle
When unlocking, the turn signals ...
Xenon bulbs
If your vehicle is equipped with Xenon bulbs, you can recognize this by the following:
the cone of light from the Xenon bulbs moves from the top to the bottom and back
again when you start the eng ...
Cruise control lever
1 To switch on or to increase the speed
2 To switch on or to reduce the speed
3 To deactivate cruise control
4 To switch on with the current speed or
with the last stored speed
When you ...