High-beam spot lamp (vehicles with LED-daytime running lamps)/infrared light (Night View Assist Plus)

Due to their location, have the bulbs in the

Due to their location, have the bulbs in the left-hand headlamp changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.

Open the hood. Switch off the lights.

Turn housing cover 1 counter-clockwise Open the hood.

and pull it out. Turn housing cover 1 counter-clockwise and pull it out.

pull it out. Turn bulb holder 2 counter-clockwise and pull it out.

of bulb holder 2 and pull the bulb from Push the two detents on the right and left of bulb holder 2 and pull the bulb from bulb holder 2.

it engages. Insert the new bulb into bulb holder 2 until it engages.

headlamp. Insert bulb holder 2 into the guide in the headlamp.

Cable outlet 3 must be pointing down and to the right.

Cable outlet 3 must be pointing down and Turn bulb holder 2 clockwise.

Cable outlet 3 must be pointing down and to the left.

clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Cigarette lighter
    WARNING   When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the ve ...

    Opening/closing the garage door
    Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system. ...

    Uploading/downloading data
    With this function, you can transfer COMAND data from one system (vehicle) to another system (vehicle). You can use either a USB stick or an SD card as temporary storage. You can only transfer ...