High-beam spot lamp (vehicles with halogen daytime running lamps)
Switch off the lights.
Open the hood.
Turn housing cover 1 counter-clockwise
and pull it out.
Turn bulb holder 2 counter-clockwise and
pull it out.
Take the bulb out of bulb holder 2.
Insert the new bulb into bulb holder 2.
Insert bulb holder 2.
Left-hand headlamp: cable outlet 3 must be pointing up and to the right.
Right-hand headlamp: cable outlet 3 must be pointing down and to the left.
Turn bulb holder 2 clockwise.
Handle 4 of bulb holder 2 is horizontal.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
• the indi ...
Smaller tank, same range
Because the new Mercedes CLS models consume significantly less fuel, it has
been possible to reduce the filling volume of the fuel tank in the four and
six-cylinder models to 59 litres. The 80-lit ...
Adding DEF
WARNING
Make sure
• DEF does not come into contact with skin, eyes, or clothing
• to keep DEF out of the reach of children If you and/or others have come into
contact with DEF:
• If DEF ...