Transferring data to another system (vehicle)
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
Select Vehicle in the main function bar by
turning 
the COMAND controller and
press 
to confirm.
The "Vehicle" menu appears.
Select System and press to
confirm.
Select Upload/Download Data and press
to confirm.
Select Import Data from Storage
Medium and press to confirm.
Select Start Data Import.
A prompt appears, asking whether the COMAND data should be overwritten.
Press Yes to confirm that the data saved in
COMAND should be overwritten.
COMAND imports the data and restarts the system.
or
Press No to cancel the import process.
See also:
Engine
Display messages
(USA only)
(Canada only)
The yellow Check
Engine warning lamp
lights up while the
ignition is switched on
with the engine
running.
Possible causes/consequences and ► ...
Problems with the steering wheel
heating
If steering wheel heating indicator lamp 3 is
flashing, the steering wheel heating has
switched off automatically. The vehicle's
electrical system voltage is too low because
too many electrica ...
Restarting the tire pressure monitor
WARNING
It is the driver's responsibility to set the tire
pressure to the recommended cold tire
pressure. Underinflated tires affect the ability
to steer or brake the vehicle. You might lose
...