Copying data to a storage medium
Insert an SD card into the SD card slot or
Insert a USB stick into the socket on the side in the glove box.
Select Vehicle in the main function bar by turning the COMAND controller and press to confirm.
The "Vehicle" menu appears.
Select System and press to confirm.
Select Upload/Download Data and press to confirm.
Select Copy Data to Storage Medium and press to confirm.
Select the storage medium to which the data should be copied.
Select Start Copying.
COMAND checks whether the storage medium has enough storage capacity. If there is enough storage capacity, the data is copied to the storage medium.
If there is not enough storage capacity, remove the storage medium. Make more storage space available on the storage medium. Then, try to copy the COMAND data to the storage medium again.
Remove the storage medium.
See also:
Important safety notes
WARNING
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the o ...
Setting the center vents in the rear
compartment
1 Rear-compartment air vent, left
2 Rear-compartment air vent, right
3 Rear-compartment air vent thumbwheel, right
4 Rear control panel for automatic climate control
5 Rear-compartment a ...
Switching locator lighting on/off
If you switch on the locator lighting, the
following come on in the dark after you have
unlocked the vehicle using the remote
control:
• the parking lamps
• the tail lamps
• the license ...