Function restrictions

You will not be able to use the telephone, will no longer be able to use the telephone, or you may have to wait before using it, in the following situations:
• when the mobile phone is switched off
• when the "Bluetooth®" function is switched off in COMAND
• when the "Bluetooth®" function is switched off on the mobile phone
• if the mobile phone is not logged into a mobile phone network

on to a network. If no network is available, The telephone automatically tries to log on to a network. If no network is available, you will not be able to make a "911" emergency call. If you attempt to make an outgoing call, the NO SERVICE message will appear for a short while.

• if you remove the SmartKey from the ignition lock during an active conversation in hands-free mode, the conversation may be continued for up to 30 minutes. After that time, it will be interrupted.

You can prevent this interruption by switching to "private call" ("private mode") on the mobile phone before deactivating COMAND (see mobile phone operating instructions).

If you wish to switch off COMAND during an active conversation in hands-free mode, the following message will appear: You cannot shut off COMAND until you have finished your telephone call

    See also:

    GVW (Gross Vehicle Weight)
    The gross vehicle weight comprises the weight of the vehicle including fuel, tools, the spare wheel, accessories installed, occupants, luggage and the drawbar noseweight, if applicable. The gr ...

    Engine
    Display messages Possible causes/consequences and Solutions The coolant level is too low. Add coolant, observing the warning notes when doing so. If coolant nee ...

    Creating new contacts/changing contacts
    In certain countries, this function stops being available from a vehicle speed of more than approximately 3 mph (5 km/h). As soon as the speed falls below approximately 2 mph (3 km/h), the f ...