Cleaning instructions
Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have cooled down before you start cleaning. Clean the display screen, when necessary, with a commercially available microfiber cloth and cleaning agent for TFT/LCD displays. Then, dry the surface with a dry microfiber cloth.
Avoid using alcoholic thinners, gasoline or abrasive cleaning agents. These could damage the display surface. Do not apply pressure to the display surface when cleaning it, as this could cause irreversible damage.
See also:
Manual interior lighting control
- To switch the front interior lighting on:
set the rocker switch to the
position.
- To switch the front interior lighting off:
set the rocker switch to the
position.
- To switch the rear in ...
First-aid kit
Open the trunk lid.
Release strap 1.
Remove first-aid kit 2 from the parcel net.
Check the expiration date on the first-aid
kit at least once a year. Replace the
contents if necessary, ...
Clearing the memory of the integrated
garage door opener on the rear-view
mirror
Turn the SmartKey to position 2 in the
ignition lock.
Press transmitter buttons 2 and 4.
The indicator lamp lights up yellow.
Press and hold transmitter buttons 2
and 4 until the indicator l ...