Important safety notes

If ESP® detects that the vehicle is deviating See the "Important safety notes" section.

If ESP® detects that the vehicle is deviating from the direction desired by the driver, one or more wheels are braked to stabilize the vehicle. If necessary, the engine output is also modified to keep the vehicle on the desired course within physical limits. ESP® assists the driver when pulling away on wet or slippery roads. ESP® can also stabilize the vehicle during braking.

If ESP® intervenes, the warning ESP® warning lamp flashes in the instrument cluster.

WARNING
Under no circumstances should you deactivate ESP® when the ==  ESP® warning lamp in the instrument cluster flashes. Proceed as follows:
• when driving off, apply as little throttle as possible.
• while driving, ease up on the accelerator pedal.
• adapt your speed to suit the prevailing road and weather conditions.
Failure to observe these guidelines could cause the vehicle to skid. ESP® cannot prevent accidents resulting from excessive speed.

vehicle is being towed with the front or rear The ignition must be switched off if the vehicle is being towed with the front or rear axle raised. Otherwise, ESP® may intervene and damage the brake system.

front or rear axle raised. Do not tow vehicles with 4MATIC with the front or rear axle raised.

tire sizes. Only then will ESP® function Only use wheels with the recommended tire sizes. Only then will ESP® function properly.

    See also:

    Refrigerant of the air-conditioning system
    The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could damage the air-condit ...

    Brake fluid level
    If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake ...

    Shift ranges
    Introduction When the automatic transmission is in position D, it is possible to restrict or derestrict the shift range. The shift range selected is shown in the multifunction display. The auto ...