Seat belt adjustment
The seat-belt adjustment function adjusts the driver's and front-passenger seat belt to the upper body of the occupants.
The belt strap is tightened slightly when:
• you engage the belt tongue in the belt buckle and you then turn the SmartKey to position 2 in the ignition lock.
• the SmartKey is in position 2 in the ignition lock and you then engage the belt tongue in the buckle.
The seat-belt adjustment will apply a retraction force if any slack is detected between the occupant and the seat belt. Do not hold on to the seat belt tightly while it is adjusting. You can switch the seat-belt adjustment on and off in the on-board computer.
The seat-belt adjustment is an integral part of the PRE-SAFE® convenience function. More information about PRE-SAFE® can be found in the "PRE-SAFE® (preventative occupant protection)" section.
See also:
Tachometer
The red band in the tachometer indicates the
engine's overrevving range.
Do not drive in the overrevving range, as
this could damage the engine.
The fuel supply is interrupted to protect the
...
Setting climate control to automatic
WARNING
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and ...
Towing a trailer
There are numerous legal requirements
concerning the towing of a trailer, e.g. speed
restrictions. Make sure that your vehicle/
trailer combination complies with the local
requirements not only in ...