Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
The automatic transmission automatically shifts to position P when you open the driver's or front-passenger door or when you remove the SmartKey from the ignition lock. In order to ensure that the automatic transmission stays in position N when towing the vehicle, you must observe the following points:
•► Make sure that the vehicle is stationary and the SmartKey in the ignition lock is in position 0.
•► Turn the SmartKey to position 2 in the ignition lock.
On vehicles with KEYLESS-GO, use the key instead of the Start/Stop button.
•► Depress and hold the brake pedal.
•► Shift the automatic transmission to position N.
•► Release the brake pedal.
•► Release the parking brake.
•► Leave the SmartKey in position 2 in the ignition lock.
See also:
Useful information
This Operator's Manual describes all models and all standard and optional equipment
of your vehicle available at the time of publication of the Operator's Manual. Country-specific
diffe ...
System self-test
If an adult occupant is properly sitting on the
passenger seat and the OCS classifies the
occupant as an adult, the indicator
lamp illuminates and goes out again after
approximately 6 seconds ...
Restoring the factory settings
Press the and
buttons simultaneously for approximately
six seconds until the battery check lamp flashes twice.
...