Towing the vehicle with the rear axle raised
Only possible on vehicles without 4MATIC.
When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions
The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system.
•► Switch on the hazard warning lamps
•► Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock.
•► When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you.
See also:
Notes on selecting, mounting and
replacing tires
- Only mount tires and wheels of the same
type and make.
- Only mount tires of the correct size onto
the wheels.
- After mounting new tires, run them in at
moderate speeds for the first 60 mil ...
High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or
2 or start the engine.
Pull the combination switch in the direction of arrow 3.
...
Problems with fuel and the fuel tank
Problem
Possible causes/consequences and
Solutions
Fuel is leaking from the vehicle.
Risk of explosion or fireThe fuel line or the fuel tank is
defective.
- Turn the S ...