Securing the vehicle to prevent it from rolling awa
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit.
The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example when changing a wheel.
•► Fold both plates upwards 1.
•► Fold out lower plate 2.
•► Guide the lugs on the lower plate fully into the openings in base plate 3.
Securing the vehicle on level ground (example:
Sedan)
•► On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change.
Securing the vehicle on slight downhill gradients (example: Sedan)
•► On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle.
See also:
Cleaning the sensors
•► Clean sensors 1 of the driving systems
with water, car shampoo and a soft cloth.
When cleaning the sensors with a power
washer, maintain a distance between the
vehicle and the nozzle ...
EBD (electronic brake force
distribution)
Observe the "Important safety notes"
section
EBD monitors and controls the brake
pressure on the rear wheels to improve
driving stability while braking.
WARNING
If EBD has malfu ...
Opening
•► Press the button on the
SmartKey.
Handle (example: Sedan)
•► Sedan: pull handle 1.•► Raise the trunk lid.
Wagon: if you pull handle 1 and keep it in
this position, you c ...