Tire pressure of at least 180 kPa (1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved:
•► Press the on/off switch on the tire inflation compressor to 0.
The tire inflation compressor is switched off.
•► Unscrew the filler hose from the valve of the faulty tire.
•► Very slowly drive forwards or reverse approximately 30 ft (10 m).
•► Pump up the tire again.
WARNING
If after five minutes a pressure of 180 kPa
(1.8 bar/26 psi) cannot be achieved, the tire
is too badly damaged to be repaired reliably
using TIREFIT.
In this case TIREFIT cannot seal the tire properly.
Do not drive any further.
Contact the nearest authorized Mercedes- Benz Center for assistance or call Roadside Assistance.
See also:
Vehicle equipment
This Operator's Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences a ...
Important safety notes
Observe the "Important safety notes"
section.
ABS regulates brake pressure in such a way
that the wheels do not lock when you brake.
This allows you to continue steering the
vehicle ...
Information about driving abroad
Converting to symmetrical low beam when driving abroad: switch the headlamps
to symmetrical low beam in countries in which traffic drives on the opposite side
of the road to the country where the ...