Stowing a used collapsible spare wheel

Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.

Only place the collapsible spare wheel in the vehicle when it is dry. Otherwise, moisture may get into the vehicle.

•► Unscrew the valve cap from the valve.

•► Use the back of the valve cap to unscrew the valve insert from the valve and release the air.

Fully deflating the tire can take a few minutes.

•► Screw the valve insert back into the valve.

•► Screw the valve cap back on.

•► Remove the protective sheet from the vehicle tool kit and pull it over the collapsible spare wheel.

•► Stow the collapsible spare wheel in the emergency spare wheel well under the trunk.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...

    Using KEYLESS-GO
    The KEYLESS-GO key must be outside the vehicle. All the doors must be closed. Touch recessed sensor surface 1 on the door handle until the side windows and the panorama roof with power tilt/s ...

    Deactivating the HOLD function
    The HOLD function is deactivated automatically if: - you accelerate and the transmission is in position D or R. - the transmission is in position P. - you apply the brakes again with a certain am ...