Cleaning the windows

WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock.

On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.

•► Clean the inside and outside of the windows with a damp cloth and a cleaning agent that is recommended and approved by Mercedes-Benz.

Do not use dry cloths, abrasive products, solvents or cleaning agents containing solvents to clean the inside of the windows.

Do not touch the insides of the windows with hard objects, e.g. an ice scraper or ring. There is otherwise a risk of damaging the windows.

Clean the water drainage channels of the windshield and the rear window at regular intervals. Deposits such as leaves, petals and pollen may under certain circumstances prevent water from draining away. This can lead to corrosion damage and damage to electronic components.

    See also:

    Warning and display messages in the multifunction display
    •► Activate ATTENTION ASSIST using the onboard computer Symbol 1 appears in the multifunction display. If ATTENTION ASSIST is active, you will be warned no sooner than 20 minutes after ...

    Activating/deactivating DSR
    Activating You can only activate DSR if you are driving at 25 mph (40 km/h) or slower. – Press button 1. Indicator lamp 2 lights up. The following messages appear in the multifunction displa ...

    Selecting a destination from the destination memory (e.g. My address)
    Introduction The destination memory always contains an entry named "My address". You may wish to assign your home address to this entry, for example, and select it for route guidanc ...