Matte finish care
If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care.
These notes also apply to light alloy wheels with a clear matte finish.
Never polish the vehicle or the light alloy wheels. Polishing causes the finish to shine.
The following may cause the paint to become shiny and thus reduce the matte effect:
- Vigorous rubbing with unsuitable
materials.
- Frequent use of car washes.
- Washing the vehicle in direct sunlight.
Never use paint cleaner, buffing or polishing products, or gloss preserver, e.g.
wax. These products are only suitable for high-gloss surfaces. Their use on vehicles with matte finish leads to considerable surface damage (shiny, spotted areas).
Always have paintwork repairs performed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Do not use wash programs with a hot wax treatment under any circumstances.
The vehicle should preferably be washed by hand using a soft sponge, car shampoo and plenty of water.
Use only insect remover and car shampoo from the range of recommended and approved Mercedes-Benz care products.
See also:
General notes
The LOW RANGE off-road gear assists you in
driving off-road and when fording. When LOW
RANGE is engaged, the engine’s performance
characteristics and the gearshifting
characteristics of the automa ...
Vehicle equipment
This Operator's Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences a ...
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct SmartKey.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. The
engine can be starte ...