Seat belt
Problem | Possible causes/consequences and •► Solutions |
After starting the engine, the red seat belt warning lamp lights up for six seconds.
The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts.
•► Fasten your seat belt
After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds.
Risk of injury
The driver's seat belt is not fastened.
•► Fasten your seat belt.
The warning tone ceases.
The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed.
Risk of injury
The driver or front passenger has not fastened their seat belt.
•► Fasten your seat belt.
The warning lamp goes out.
Risk of injury
There are objects on the front-passenger seat.
•► Remove the objects from the front-passenger seat and stow them in a secure place.
The warning lamp goes out.
The red seat belt warning lamp flashes and an intermittent audible warning sounds.
Risk of injury
The driver or front passenger has not fastened their seat belt. In
addition, you are driving faster than 15 mph (25 km/h) or you have
briefly driven faster than 15 mph (25 km/h).
•► Fasten your seat belt.
The warning lamp goes out and the intermittent warning tone ceases.
Risk of injury
There are objects on the front-passenger seat. In addition, you are
driving faster than 15 mph (25 km/h) or you have briefly driven
faster than 15 mph (25 km/h).
•► Remove the objects from the front-passenger seat and stow them in a secure place.
The warning lamp goes out and the intermittent warning tone ceases.
See also:
Warning and display messages in the
multifunction display
– Activate ATTENTION ASSIST using the onboard
computer (Y page 232).
Symbol 1 appears in the multifunction
display.
– If necessary, take a break.
– Press or
to confirm the
message.
On l ...
Vehicle identification plate withvehicle identification number (VIN)and paint code number
► Open the driver's door.
You will see vehicle identification plate 1.
Example: vehicle identification plate (USA only)
2 Paint code
3 VIN
Example: vehicle identification plate (Can ...
Activating/deactivating
Turn the SmartKey to position 2 in the ignition lock.
To switch on: press the button.
The indicator lamp in the button
lights up. Airflow and air distribution are set to automatic mode.
...