Activating the HOLD function

•► Make sure that the activation conditions are met.

•► Depress the brake pedal.

•► Quickly depress the brake pedal further

•► Quickly depress the brake pedal further until HOLD display 1 appears in the multifunction display.

The HOLD function is activated. You can release the brake pedal.

If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again.

WARNING
The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing).

    See also:

    Problems with the transmission
    Problem Possible causes/consequences and Solutions The transmission has problems shifting gear. The transmission is losing oil. Have the transmission checked at a qualif ...

    Releasing seat belts
    Press release button 4() and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped ...

    Automatic car wash
    WARNING Braking efficiency is reduced after washing the vehicle. This could cause an accident. For this reason, you must drive particularly carefully after washing the vehicle until the bra ...