Important safety notes

Cruise control maintains a constant road speed for you. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is laden, you must select shift range 1, 2 or 3 in good time. By doing so, you will make use of the braking effect of the engine, which relieves the load on the brake system and prevents the brakes from overheating and wearing too quickly.

Use cruise control only if road and traffic conditions make it appropriate to maintain a steady speed for a prolonged period. You can set any road speed above 20 mph (30 km/h).

WARNING
The cruise control is a convenience system designed to assist the driver during vehicle operation. The driver is and must always remain responsible for the vehicle's speed and for safe brake operation.

Only use the cruise control if the road, traffic, and weather conditions make it advisable to travel at a constant speed.

 - The use of the cruise control can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed.
 - The use of the cruise control can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control.
 - Deactivate the cruise control when driving in fog.

The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed.

WARNING
The cruise control brakes automatically so that the set speed is not exceeded.

    See also:

    Setting the rear-compartment air vents
    Setting the center vents in the rear compartment Setting the center vents in the rear compartment 1 Rear-compartment air vent thumbwheel 2 Rear-compartment air vent, right 3 Rear control panel f ...

    Introduction
    The Sett. menu can be used for: - changing the instrument cluster settings - changing the light settings - changing the vehicle settings - changing the convenience settings - restoring the fact ...

    System self-test
    The 42 indicator lamp illuminates when you: • turn the SmartKey to position 1 or 2 in the ignition lock • on vehicles with KEYLESS-GO, press the Start/Stop button once or twice The indicator ...