Selector lever
Overview of transmission positions
Selector lever in AMG vehicles with P button
P Park position with parking lock
R Reverse gear
N Neutral
D Drive
Transmission position and drive program display
1. Transmission position display
2. Drive program display
The indicators light up when the SmartKey is inserted into the ignition lock. The indicators go out when the SmartKey is removed from the ignition lock.
AMG vehicles: the current position of the selector lever is shown by the indicators next to the selector lever.
If the transmission position display in the multifunction display is not working, you should pull away carefully to check whether the desired transmission position is engaged. Ideally, you should select transmission position D and drive program E. Do not restrict the shift range.
See also:
Problems with the steering wheel
heating
The steering wheel heating has switched off
prematurely or cannot be switched on. The
vehicle's electrical system voltage is too low
because too many electrical consumers are
switched on.
- S ...
Opening and closing
Overhead control panel
1. To open
2. To open
3. To close
•► Turn the SmartKey to position 1 or 2 in the
ignition lock.
•► Press or pull the switch in the
corresponding di ...
MB Info call button
► Open the stowage compartment under the
armrest.
► Press and hold MB Info call button 1
for
more than two seconds.
This initiates a call to the Mercedes-Benz
Customer Assistanc ...