Automatic engine start
The engine is started automatically if you:
- release the brake pedal when HOLD is not
activated and the transmission is in
position D or N
- shift the transmission to position R
- depress the accelerator pedal
- have switched off the ECO start/stop
function by pressing the ECO button
- switch to drive program S, S+ or M
- unfasten your seat belt or open the driver's
door
The engine is also started automatically if:
- the vehicle starts to roll.
- the brake system requires this.
- the system detects moisture on the
windshield when the air-conditioning
system is switched on.
- the charge level of the battery is too low.
- the driver's seat belt is removed or the
driver's door is opened.
See also:
Switching on/off
The three blue indicator lamps in the buttons
indicate the ventilation level you have
selected.
If the battery voltage is too low, the seat
ventilation may switch off.
•► Make sure tha ...
Cornering light function
The cornering light function improves the
illumination of the road over a wide angle in
the direction you are turning, enabling better
visibility in tight bends, for example. It can
only be ...
Opening/closing the garage door
Once programmed, the integrated garage
door opener will assume the function of the
garage door system's remote control. Please
also read the operating instructions for the
garage door system.
...