High-beam headlamps (halogen headlamps)/cornering lamps (Bi-Xenon headlamps)

•► Switch off the lights.

•► Switch off the lights.

•► Open the hood.

•► Turn housing cover 1 counter-clockwise and pull it out.

•► Turn bulb holder 2 counter-clockwise and pull it out.

•► Take the bulb out of bulb holder 2;.

•► Insert the new bulb into bulb holder 2.

•► Insert bulb holder 2 into the lamp and turn it clockwise.

•► Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Checking tire pressure manually
    To determine and set the correct tire pressure, proceed as follows:   Remove the valve cap of the tire that is to be checked.   Press the tire pressure gauge securely onto the valve. ...

    Important information
    WARNING When the climate control system is deactivated, the outside air supply and circulation are also deactivated. Only choose this setting for a short time. Otherwise the windows could fo ...

    Headlamps fogged up on the inside
    The headlamps may fog up on the inside if there is high atmospheric humidity. Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the journey an ...