Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
- position of the seat, backrest and head
restraint
- active multicontour seat: dynamic function
level
- driver's side: steering wheel position
- driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
•► Adjust the seat
•► On the driver's side, adjust the steering wheel and the exterior mirro
•► Press memory button M and one of the storage position buttons 1, 2 or 3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
See also:
Storing and maintaining the currentspeed
You can store the current speed if you are
driving faster than 20 mph (30 km/h).
► Accelerate the vehicle to the desired
speed.
► Briefly press the cruise control lever
up 1 or down ...
Functions with the forward/rewind F button
You can use the remote control to execute the same functions as the COMAND
control panel.
Mode
Function
Audio mode
Selects a station using the station search function
Sel ...
Problems with fuel and the fuel tank
Problem
Possible causes/consequences and
Solutions
Fuel is leaking from the vehicle.
Risk of explosion or fireThe fuel line or the fuel tank is
defective.
- Turn the S ...