Calling up a stored parking position setting
•► Turn the SmartKey to position 2 in the
ignition lock.
•► Adjust the exterior mirror on the frontpassenger
side with the corresponding
button
•► Engage reverse gear.
The exterior mirror on the front-passenger side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original position:
- as soon as you exceed a speed of 6 mph
(10 km/h)
- about ten seconds after you have
disengaged reverse gear
- if you press button 1 for the exterior
mirror on the driver's side
See also:
Route guidance active
No change of direction announced
1 Distance to the destination
2 Symbol for "follow the road's course"
3 Distance to the next change of direction
4 Current road
Change of direct ...
Please bear the following in mind
The engine oils are matched to the
performance of Mercedes-Benz engines and
service intervals. You should therefore only
use engine oils and oil filters that are
approved for vehicles with mainten ...
"Coupling up a trailer" function
This function is only available on vehicles with
a trailer tow hitch.
1 Center of the vehicle on the red guide line
approximately 10 in (0.25 m) away from
the rear area
2 Center of the vehic ...