Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position.
•► Make sure that the vehicle is stationary and that the SmartKey is in position 2 in the ignition lock.
•► Press button 2 for the exterior mirror on the front-passenger side.
•► Engage reverse gear.
The exterior mirror on the front-passenger side moves to the preset parking position.
•► Use adjustment button 3 to adjust the exterior mirror to a position that allows you to see the rear wheel and the curb.
The parking position is stored.
If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position.
You can also store the parking position using memory button M 4.
•► Make sure that the SmartKey is in position 2 in the ignition lock.
•► With the exterior mirror on the frontpassenger side activated, use adjustment button 3 to adjust the exterior mirror to a position which allows you to see the rear wheel and the curb.
•► Press memory button M 4 and one of the arrows on adjustment button 3 within three seconds.
The parking position is stored if the exterior mirror does not move.
If the mirror moves out of position, repeat the steps.
See also:
Please bear the following in mind
At the onset of winter, have your vehicle
winterproofed at a qualified specialist
workshop, e.g. at an authorized Mercedes-
Benz Center.
Observe the notes in the "Changing a wheel"
...
Displaying the digital speedometer oroutside temperature
If you have selected the digital speedometer
for the status bar, the outside
temperature is displayed here.
► Press the
button on the
steering wheel to select the standard
display.
...
Load index
Tire data is vehicle-specific and may
deviate from the data in the example.
In addition to the load bearing index, load
index 1 may be imprinted after the letters
that identify speed r ...