installing and removing the seat cushion
You must remove the seat cushion if you wish to lift the trunk floor, e.g. if the vehicle has a flat tire.
•► To remove: fold seat cushion 2 upwards and remove it from seat cushion guides 1.
•► To install: guide seat cushion 2 into seat cushion guides 1 at a slight angle from the rear 3.
•► Fold seat cushion 2 back into its original position 4 until it engages.
See also:
DEF
Important safety notes
For BlueTEC vehicles only.
DEF is a non-flammable, non-toxic, colorless,
odorless and water-soluble fluid.
Rinse surfaces that have come into
contact with DEF immediately ...
Important safety notes
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
stop operating.
WARNING
Only use fuses approved by Merce ...
Multifunction display
Values and settings as well as display messages are shown in the multifunction
display.
: Description field
; Menu bar
To show menu bar 2: press the
or
button on the steering whe ...