You must reset each side window if a side window can no longer be closed fully.

•► Close all the doors.

•► Turn the SmartKey to position 1 or 2 in the ignition lock.

•► Pull the corresponding switch on the door control panel until the side window is completely closed.

•► Hold the switch for an additional second.

If the side window opens again slightly:

•► Immediately pull the corresponding switch on the door control panel until the side window is completely closed.

•► Hold the switch for an additional second.

•► If the corresponding side window remains closed after the button has been released, the side window has been reset correctly.

If this is not the case, repeat the steps above again.