Using KEYLESS-GO

The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.

•► Touch recessed sensor surface 1 on the

•► Touch recessed sensor surface 1 on the door handle until the side windows and the sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed.

Make sure you only touch recessed sensor surface 1.

•► Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed.

On vehicles with a panorama roof with power tilt/sliding panel:

•► Touch recessed sensor surface 1 on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close.

•► To interrupt convenience closing: release recessed sensor surface 1 on the door handle.

    See also:

    Checking the battery
    Press the or button. The battery is working properly if battery check lamp 1 lights up briefly If battery check lamp 1 does not light up briefly during the test, the battery is discha ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific diffe ...

    Targeted brake actuation: Active Blind Spot Assist
    Another innovation Mercedes-Benz offers for the Mercedes-Benz CL-Class is Active Blind Spot Assist, a system that makes use of a multi-stage warning concept. If the system detects that a lane chan ...