Locking the vehicle (mechanical key)
If the vehicle can no longer be locked with the SmartKey, use the mechanical key.
•► Open the driver's door.
•► Close the front-passenger door, the rear
doors and the trunk lid/tailgate.
•► Press the locking button.
•► Check whether the locking knobs on the
front-passenger door and the rear doors
are still visible. Press down the locking
knobs by hand, if necessary.
•► Close the driver's door.
•► Take the mechanical key out of the
SmartKey
•► Insert the mechanical key into the lock of
the driver's door as far as it will go.
•► Turn the mechanical key clockwise as far
as it will go to position 1.
•► Turn the mechanical key back and remove
it.
•► Make sure that the doors and the trunk lid/
tailgate are locked.
•► Insert the mechanical key into the
SmartKey.
See also:
Activating/deactivating
- To activate: press the
button.
The indicator lamp in the
button lights up.
- To deactivate: press the
button.
The indicator lamp in the
button goes out. The cooling with air
dehumid ...
Braking
If ABS intervenes when braking, you will feel
a pulsing in the brake pedal.
- If ABS intervenes: continue to depress the
brake pedal with force until the braking
situation is over.
- To make a ...
The windshield wipers are obstructed
Leaves or snow, for example, may be
obstructing the windshield wiper movement.
The wiper motor has been deactivated.
- For safety reasons, you should remove the
SmartKey from the ignition lock.
...