ATA (Anti-Theft Alarm system)
A visual and audible alarm is triggered if the alarm system is armed and you open:
- a door
- the vehicle with the mechanical key
- the trunk lid/tailgate
- the hood
The alarm is not switched off, even if you close the open door that has triggered it, for example.
If the alarm stays on for more than 30 seconds, the emergency call system mbrace (USA only) or TELE AID (Canada only) initiates a call to the Customer Assistance Center automatically. The emergency call system initiates the call provided that:
- you have subscribed to the mbrace/
TELE AID service.
- the mbrace/TELE AID service has been
activated properly.
- the required mobile phone, power supply
and GPS are available.
•► To arm: lock the vehicle with the SmartKey or KEYLESS-GO.
Indicator lamp 1 flashes. The alarm system is armed after approximately 15 seconds.
•► To deactivate: unlock the vehicle with the SmartKey or KEYLESS-GO.
•► To stop the alarm using the SmartKey: insert the SmartKey into the ignition lock.
The alarm is switched off.
or
•► Press the or
button on the
SmartKey.
The alarm is switched off.
•► To stop the alarm using KEYLESS-GO: grasp the outside door handle. The SmartKey must be outside the vehicle.
The alarm is switched off.
or
•► Press the Start/Stop button on the
dashboard. The SmartKey must be inside
the vehicle.
The alarm is switched off.
See also:
Activating/deactivating
Turn the SmartKey to position 2
in the ignition lock.
To switch on: press the
button. The indicator lamp in the
button lights up. Airflow and air
distribution are set to automatic mode.
or ...
Important safety notes
WARNING
Air bags are designed to reduce the incidence
of injuries and fatalities in certain situations:
- frontal impacts (driver's and frontpassenger
front air bags and driver's knee
bag)
- ...
Adaptive Highbeam Assist
You can use this function to set the
headlamps to change between low beam and
high beam automatically. The system
recognizes vehicles with their lights on, either
approaching from the opposite ...