Resetting triggered NECK-PRO head restraints
WARNING
For safety reasons, have the NECK-PRO head
restraints checked at an authorized
Mercedes-Benz Center after a rear-end
collision.
WARNING
When pushing back the NECK-PRO head
restraint cushion, make sure your fingers do
not become caught between the head
restraint cushion and the cover. Failure to
observe this could result in injuries.
Resetting the NECK-PRO head restraints requires a lot of strength. If you have difficulty resetting the NECK-PRO head restraints, have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Example: Sedan
- Tilt the top of the NECK-PRO head restraint
cushion forwards in the direction of
arrow 1.
- Push the NECK-PRO head restraint cushion
down in the direction of arrow 2 as far as
it will go.
- Firmly push the NECK-PRO head restraint
cushion back in the direction of arrow 3
until the cushion engages.
- Repeat this procedure for the second
NECK-PRO head restraint.
See also:
SRS warning lamps
SRS functions are checked regularly when
you switch on the ignition and when the
engine is running. Therefore, malfunctions
can be detected in good time.
The SRS warning lamp in the
instrumen ...
Cruise control
Important safety notes
Cruise control maintains a constant road
speed for you. It brakes automatically in order
to avoid exceeding the set speed. On long and
steep downhill gradients, especially i ...
Left control panel
- Calls up the menu and menu bar
Press briefly:
- Scrolls through lists
- Selects a submenu or function
- In the Audio menu: selects a stored station, an audio track o ...