Restarting the tire pressure monitor

WARNING
It is the driver's responsibility to set the tire pressure to the recommended cold tire pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle.

When you restart the tire pressure monitor, all existing warning messages are deleted and the warning lamps go out. The monitor uses the currently set tire pressures as the reference values for monitoring. In most cases, the tire pressure monitoring system recognizes the new reference values automatically.

However, you can also define reference values manually as described here:
value recommended for the corresponding  Set the tire pressure to the value recommended for the corresponding driving situation on the Tire and Loading Information placard on the driver's side B-pillar.
Additional tire pressure values for driving at high speeds or with heavy loads can be found in the tire pressure table on the inside of the fuel filler flap.
on all four wheels.  Make sure that the tire pressure is correct on all four wheels.
2 in the ignition lock.  Make sure that the SmartKey is in position 2 in the ignition lock.
or  Press the button on the or steering wheel to select the Service button on the steering wheel to select the Service menu.
or  Press the button to select or Tire Pressure. button to select Tire Pressure.
button.  Press the The multifunction display shows the button.
The multifunction display shows the current tire pressure of the individual tires or the Tire pressures will be displayed after driving a few minutes message.
button.  Press the The Use Current Pressures as New button.
The Use Current Pressures as New Reference Values message appears in the multifunction display.

If you wish to confirm the restart:

button.  Press the The Tire Press. Monitor Restarted button.
The Tire Press. Monitor Restarted message appears in the multifunction display.
After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.

If you wish to cancel the restart:

The tire pressure values stored at the last  Press the The tire pressure values stored at the last button.
The tire pressure values stored at the last restart will continue to be monitored.

    See also:

    Matte finish care
    If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care. These notes also apply to light alloy wheels with ...

    Important safety notes
    WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the b ...

    Well-proven seat technology with a new design
    Where seat development is concerned, Mercedes-Benz had added a new quality to a well established Mercedes concept, namely padded seat piping - a sophisticated and demanding upholstery technique th ...