Checking tire pressure electronically
Make sure that the SmartKey is in position
2 in the ignition lock.
Press the
or
button on the
steering wheel to select the Service
menu.
Press the
or
button to select
Tire Pressure.
Press the
button.
The current tire pressure for each wheel will
be displayed in the multifunction display.
If the vehicle has been parked for longer than 20 minutes, the Tire pressures will be displayed after driving a few minutes message appears in the display.
After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.
If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.
See also:
Seat belt
Problem
Possible causes/consequences and
Solutions
After
starting the engine, the red seat belt warning lamp lights up for six
seconds.
The seat belt warning lamp re ...
Uploading/downloading data
With this function, you can transfer COMAND
data from one system (vehicle) to another
system (vehicle). You can use either a USB
stick or an SD card as temporary storage.
You can only transfer ...
Important safety notes
DSR is an aid to assist you when driving
downhill. It keeps the speed of travel at the
speed selected on the on-board computer.
The steeper the downhill gradient, the greater
the DSR braking eff ...